Self-concatenated coding for wireless communication systems

In this thesis, we have explored self-concatenated coding schemes that are designed for transmission over Additive White Gaussian Noise (AWGN) and uncorrelated Rayleigh fading channels. We designed both the symbol-based Self-ConcatenatedCodes considered using Trellis Coded Modulation (SECTCM) and bit-based Self- Concatenated Convolutional Codes (SECCC) using a Recursive Systematic Convolutional (RSC) encoder as constituent codes, respectively. The design of these codes was carried out with the aid of Extrinsic Information Transfer (EXIT) charts. The EXIT chart based design has been found an efficient tool in finding the decoding convergence threshold of the constituent codes. Additionally, in order to recover the information loss imposed by employing binary rather than non-binary schemes, a soft decision demapper was introduced in order to exchange extrinsic information withthe SECCC decoder. To analyse this information exchange 3D-EXIT chart analysis was invoked for visualizing the extrinsic information exchange between the proposed Iteratively Decoding aided SECCC and soft-decision demapper (SECCC-ID). Some of the proposed SECTCM, SECCC and SECCC-ID schemes perform within about 1 dB from the AWGN and Rayleigh fading channels’ capacity. A union bound analysis of SECCC codes was carried out to find the corresponding Bit Error Ratio (BER) floors. The union bound of SECCCs was derived for communications over both AWGN and uncorrelated Rayleigh fading channels, based on a novel interleaver concept.Application of SECCCs in both UltraWideBand (UWB) and state-of-the-art video-telephone schemes demonstrated its practical benefits.In order to further exploit the benefits of the low complexity design offered by SECCCs we explored their application in a distributed coding scheme designed for cooperative communications, where iterative detection is employed by exchanging extrinsic information between the decoders of SECCC and RSC at the destination. In the first transmission period of cooperation, the relay receives the potentially erroneous data and attempts to recover the information. The recovered information is then re-encoded at the relay using an RSC encoder. In the second transmission period this information is then retransmitted to the destination. The resultant symbols transmitted from the source and relay nodes can be viewed as the coded symbols of a three-component parallel-concatenated encoder. At the destination a Distributed Binary Self-Concatenated Coding scheme using Iterative Decoding (DSECCC-ID) was employed, where the two decoders (SECCC and RSC) exchange their extrinsic information. It was shown that the DSECCC-ID is a low-complexity scheme, yet capable of approaching the Discrete-input Continuous-output Memoryless Channels’s (DCMC) capacity.Finally, we considered coding schemes designed for two nodes communicating with each other with the aid of a relay node, where the relay receives information from the two nodes in the first transmission period. At the relay node we combine a powerful Superposition Coding (SPC) scheme with SECCC. It is assumed that decoding errors may be encountered at the relay node. The relay node then broadcasts this information in the second transmission period after re-encoding it, again, using a SECCC encoder. At the destination, the amalgamated block of Successive Interference Cancellation (SIC) scheme combined with SECCC then detects and decodes the signal either with or without the aid of a priori information. Our simulation results demonstrate that the proposed scheme is capable of reliably operating at a low BER for transmission over both AWGN and uncorrelated Rayleigh fading channels. We compare the proposed scheme’s performance to a direct transmission link between the two sources having the same throughput

Physical layer security: friendly Jamming in an untrusted relay scenario

This paper investigates the achievable secrecy regions when employing a friendly jammer in a cooperative scenario employing an untrusted relay. The untrusted relay which helps to forward the source signal towards the destination, could also be regarded as a potential eavesdropper. Our system employs a friendly jammer which sends a known noise signal towards the relay. In this paper, we investigate the effect of jammer and relay locations on the achievable secrecy rate. We consider two scenarios where in the first case we consider no direct transmission between the source and destination, while in the second case we include a source to destination direct link in our communication system

Secure quantum turbo coded superdense coding scheme

In this paper we present a novel secure quantum turbo coded (QTC) superdense (SD) coding scheme. We have integrated SD with QTC to benefit from the inherent near optimum performance of turbo codes. We have further incorporated the quantum secure direct communication (QSDC) protocol within the proposed QTC-SD system for the sake of ensuring absolute security. Explicitly, the QSDC protocol exploits dummy entangled pairs for detecting the presence of eavesdropper. Hence, the proposed scheme ensures absolute security, detects the presence of an eavesdropper and considers practical issues when error is induced in a quantum depolarizing channel. Furthermore, we have experimentally determined the noise threshold levels for the proposed QTC-SD system to detect the presence of an eavesdropper.</p

Distributed matching algorithms for spectrum access: a comparative study and further enhancements

In this paper, we consider a spectrum access scenario which consists of two groups of users, namely Primary Users (PUs) and Secondary Users (SUs) in Cooperative Cognitive Radio Networks (CCRNs). SUs cooperatively relay PUs messages based on Amplify-and-Forward (AF) and Decode-and-Forward (DF) cooperative techniques, in exchange for accessing some of the spectrum for their secondary communications. From the literatures, we found that the Conventional Distributed Algorithm (CDA) and Pragmatic Distributed Algorithm (PDA) aim to maximize the PU sum-rate resulting in a lower sum-rate for the SU. In this contribution, we have investigated a suit of distributed matching algorithms. More specifically, we investigated SU-based CDA (CDA-SU) and SU-based PDA (PDA-SU) that maximize the SU sum-rate. We have also proposed the All User-based PDA (PDA-ALL), for maximizing the sum-rates of both PU and SU groups. A comparative study of CDA, PDA, CDA-SU, PDA-SU and PDA-ALL is conducted, and the strength of each scheme is highlighted. Different schemes may be suitable for different applications. All schemes are investigated under the idealistic scenario involving perfect coding and perfect modulation, as well as under practical scenario involving actual coding and actual modulation. Explicitly, our practical scenario considers the adaptive coded modulation based DF schemes for transmission flexibility and efficiency. More specifically, we have considered the Self-Concatenated Convolutional Code (SECCC), which exhibits low complexity, since it invokes only a single encoder and a single decoder. Furthermore, puncturing has been employed for enhancing the bandwidth efficiency of SECCC. As another enhancement, physical layer security has been applied to our system by introducing a unique Advanced Encryption Standard (AES) based puncturing to our SECCC scheme.</p

Millimeter-wave enabled PAM-4 data transmission over hybrid FSO-MMPOF link for access networks

In this paper, we propose a full duplex architecture based on a hybrid link composed of free space optics (FSO) and multimode plastic optical fiber (MMPOF) for short range wireless access networks. The proposed architecture employs mode group division multiplexing (MGDM) and wavelength reuse techniques to transmit data between central unit (CU) and radio access units (RAUs). An optical frequency comb source to generate multiple optical sidebands is realized by using a single laser source to provide 60 GHz millimeter-wave (mm-wave) signals at each RAU by simultaneously transmitting PAM-4 signal on linearly polarized (LP) modes of each optical sideband. Data rate of 2x12 Gbps at mm-wave frequency of 60 GHz is achieved for both downlink (DL) and uplink (UL) transmissions. The transmission of 2x12 Gbps PAM-4 signal over hybrid FSO-MMPOF link is investigated at different values of refractive index structure parameter (C^2_n ) by employing log-normal (LN) FSO channel model to support three RAUs in a ring topology. The acceptable receiver sensitivities below -5 dBm and -0.6 dBm for DL and UL transmissions are achieved, respectively. The proposed hybrid architecture can be a potential candidate for future communication networks

Analog radio over fiber aided C-RAN: optical aided beamforming for multi-user adaptive MIMO design

Given the increasing demand for high data-rate, high-performance wireless communications services, the demand on the radio access networks (RAN) has been increasing significantly, where optical fiber has been widely used both for the backhaul and fronthaul. Additionally, advances in signal processing such as multiple-input multiple-output (MIMO) techniques, have improved the performance as well as transmission rate of communications networks. Beamforming has been used as an efficient MIMO technique for providing a signal to noise ratio (SNR) gain as well as reducing the multi-user interference. However, beamforming requires the employment of phase-shifters, which suffers from reduced phase resolutions, degraded noise figures as well as beam-squinting in addition to the implementation challenges. Hence, in this paper we employ an analogue radio over fiber (A-RoF) aided architecture for supporting the requirements of the current and future mobile networks, where we design a photonics aided beamforming technique in order to eliminate the bulky electronic phase-shifters and the beam-squinting effect, while also providing a low-cost RAN solution. Additionally, this photonics aided beamforming is combined with a reconfigurable multi-user MIMO technique, where users can communicate with one or multiple remote radio heads (RRHs), while employing stand-alone beamforming, beamforming combined with diversity or with multiplexing depending on the available resources and the user channel information as well as the quality of service requirements